POWER SUPPLY UNITS FOR PERMANENT AND EMERGENCY LIGHTING COMBINED WITH LPL AND LPLR LIGHTING FIXTURES

POWER SUPPLY UNITS FOR PERMANENT AND EMERGENCY LIGHTING COMBINED WITH LPL AND LPLR LIGHTING FIXTURES

Description

When ALP power supply units are combined with LPL and LPLR lighting fixtures can be set up to optimize the lighting in all working conditions of the lift either with power or in case of power failure.ALP power supplies are designed for a high quality lighting and above all are designed to reduce the operating costs of about 50%.

In comparison to the current lift standards LPL and LPLR lighting fixtures are deliberately equipped with an excellent illumination capacity which can be reduced to improve absorption and efficiency. In particular, with led lighting not only absorption and efficiency thanks to the current reduction improve enormously, but also the lifetime and the luminous performances with the passing of time.

  • VACANCY / BUSY activation by a separate control or by a presence detector inside
  • Sensor sensitivity adjustment
  • Adjusting lighting level with BUSY
  • Adjustable lighting level with VACANCY
  • Emergency lighting with the same luminous source
  • Control of a separate alarm
  • Ni- Mh batteries included
  • From 1 to 6 hours autonomy of operation depending on the luminosity level setting
ItalianoEnglishFranšaisEspa˝olDeutsch

Search the web site


MICROSISTEMI INDUSTRIALE srl - Via Marecchiese, 484 - 47923 Rimini (RN) - P.IVA 03965750403
P.Iva/Cod. Fisc./Iscr. Reg. Impr.: 03965750403 - REA: RN-318870 - Cap Soc. ÔéČ 30.000 i.v.
Tel: (+39) 0541/758332 - Fax: (+39) 0541/750942 - PEC: microsistemiindustrialesrl@pec.it - Mail: info@microsistemi.biz